Ultra Uniform & High-Intensity Illumination

Beleuchtungen für die IBV

At automatica, L.E.S.S. unveil LuxiBright, a new lighting technology. It delivers ultra-uniform, high-intensity & directional illumination without hotspots. Two sizes of LuxiRing are launched: a compact 76mm diameter ring and a larger 160mm version. The rings are available with two lighting angles: 20° and 45° . Lighting control exhibit three smart driving modes & fully integrated via a compact controller. LuxiRing features an ultra-thin, compact form 4× thinner and 5× lighter than standard solutions.

Weitere Information

Thematik: Beleuchtungen für die IBV Ausgabe: inVISION Product Newsletter 14/15 2025

L.E.S S. SA

Zur Firmenwebsite

More about the topic

Image: STMicroelectronics

5MP Image Sensors with Dual Global and Rolling Shutter

Image: TeDo Verlag GmbH

Ruggedized IP67 Edge AI Platform with 2070 FP4 TFLOPS

Bild: Corning Technology Center – Lyon

20MP Liquid Lenses with C-Mount

Image: Werth Messtechnik GmbH

Multi-Sensor CMM at an Entry-level Price

Werth EasyScope multi-sensor coordinate measuring machines are now available in three versions.

Read more: Multi-Sensor CMM at an Entry-level Price
Image: Lucid Vision Labs Inc

10GigE VIS-SWIR Camera with TEC

Lucid Vision launched the Atlas10 SWIR, a 10GigE camera with RDMA support featuring Sony’s 5.2 MP IMX992 and 3.2 MP IMX993 SenSWIR InGaAs sensors with integrated thermoelectric cooling…

Read more: 10GigE VIS-SWIR Camera with TEC
Image: Espros Photonics Corporation

ToF Starter Kit with Raspberry Pi 5

Espros Photonics introduces the EPC670 Starter Kit, a ready-to-use 3D depth evaluation platform built around the EPC670 ToF sensor and a Raspberry Pi 5 host system.

Read more: ToF Starter Kit with Raspberry Pi 5
Bild: Teledyne DALSA

2D and 3D AI Camera with just one CMOS

Teledyne e2v introduces the Perciva 5D camera, which generates 2D and 3D data from a single CMOS sensor.

Read more: 2D and 3D AI Camera with just one CMOS
Image: Anticipate GmbH

Adhesive Seam Inspection with AI

Anticipate’s Fluidworks delivers a production-ready, scalable AI-powered evaluation solution – including operator guidance and analytics – for adhesive seam inspection.

Read more: Adhesive Seam Inspection with AI

Intuitive Software for Surface Measurements

Mahr presents the new version of its surface software MarWin MarSurf3D, whose user interface (GUI)…

Read more: Intuitive Software for Surface Measurements
See Around Corners

MidOpt’s Rotating Right-Angle Attachments (RA034 and RA060) make it easy to see around corners in…

Read more: See Around Corners

3D-Array-Lidar with SPAD-Technology

Sony Europe Digital Imaging Business introduced the AS-DT1, a 3D array sensing lidar with SPAD technology, all-in-one product.

Read more: 3D-Array-Lidar with SPAD-Technology
Multi-Platform GUI Viewer

ArenaView MP is the new viewer from Lucid Vision, designed to provide an easy-to-use interface for configuring, visualizing, and evaluating Lucid cameras.

Read more: Multi-Platform GUI Viewer

Hyperspectral Vision for Microscopy

PVA TePla’s VEpioneer Micro is the world’s first fully integrated onebutton bench-top Hyperspectral Vision system for microscopic inspection (Wavelength range VNIR: 400-1000nm,…

Read more: Hyperspectral Vision for Microscopy
Novel Hyperspectral Camera

In a novel hyperspectral camera developed by Fraunhofer IPMS, a conventional 2D camera first captures a high-resolution image of the object.

Read more: Novel Hyperspectral Camera
Factory Calibrated RGB-ToF Camera

Lucid Vision announced the launch of the Helios2 Wide Chroma, a factory-calibrated RGB-D camera that delivers aligned color and depth data in…

Read more: Factory Calibrated RGB-ToF Camera
1.2MP ToF Camera for Dynamic Environments

The Nion time-of-flight camera from IDS combines high spatial resolution – thanks to the 1.2MP AF0130 sensor from onsemi’s Hyperlux ID family…

Read more: 1.2MP ToF Camera for Dynamic Environments

USB-C Autofocus Cameras

The Imaging Source introduces the Aptiris Series, a compact (36×36mm) USB 3.1 (USB-C) autofocus camera platform with power over USB.

Read more: USB-C Autofocus Cameras
New Version Frame Grabber Acquisition Software

The new version of Euresys’ acquisition software eGrabber 25.12 adds the 3-camera, line-scan firmware variant for PC3603 Coaxlink Quad CXP-12 and PC3603-4…

Read more: New Version Frame Grabber Acquisition Software
Highly Dynamic Four-Channel Lighting Controller

Gefasoft presents the 4C-20A-V LED lighting controller. Four fully independent, current-controlled channels enable precise and flexible control of multiple lights.

Read more: Highly Dynamic Four-Channel Lighting Controller
Lens Enclosure for CS- and C-Mount Lenses

Midwest Optical’s LE100 lens enclosure is designed to shield lenses and filters from dust, debris, moisture and impact, while maintaining optical clarity…

Read more: Lens Enclosure for CS- and C-Mount Lenses
7-Wavelength Illumination for Spectral Imaging

Leimac’s 7-wavelength (UV, VIS, NIR) switching illumination delivers multispectral imaging, capturing full-resolution data at every band.

Read more: 7-Wavelength Illumination for Spectral Imaging
Camera Modules for Raspberry PI 5

Leopard Imaging has introduced a product line of camera modules specifically designed for the Raspberry Pi 5. This device features a quad-core…

Read more: Camera Modules for Raspberry PI 5
Smart Camera with Edge AI

LMI Technologies introduces the Gocator 2D cameras which combines high-speed imaging and edge AI in one compact, IP67-rated package.

Read more: Smart Camera with Edge AI
Pyrometer with 110µs Exposure Time

Optris’ CTi 4m high-speed IR thermometer features an exceptionally fast exposure time of 110µs, (response time 320µs) making it ideally suited for…

Read more: Pyrometer with 110µs Exposure Time