Roboception’s rc_reason BoxPick depalletizing software module is an optional on-board component of the rc_visard that provides a perception solution for robotic pick-and-place applications such as de-/palletizing and sorting of packages.
Roboception’s rc_reason BoxPick depalletizing software module is an optional on-board component of the rc_visard that provides a perception solution for robotic pick-and-place applications such as de-/palletizing and sorting of packages.
The Nexos 4.0 software from Eleven Dynamics enables automated measurement processes to be simulated and managed in a digital twin. This means that any robot, sensor and cell configuration as well as external software can be supported. Users do not need to know different software or interfaces, just one.
The laser photothermal technology advanced by Enovasense – a Precitec Optronik subsidiary – measures coating thicknesses of all types (e.g. metal, ceramics, paint, polymers, adhesives, etc.) on any carrier material. This makes it possible to precisely measure the thickness of opaque layers as well as nanometer-thin coatings.
The lock-in principle enables the extraction of the smallest signals from very noisy environments. With the HeliCam C4, Heliotis is also making the process accessible for industrial cameras. A camera that integrates this technology at the pixel level can almost completely suppress sources of interference such as constant background or 1/f noise.
With the VisionPort, Invisium has developed a multifunctional scanner that captures euro pallets, mesh boxes or crates in countless variations on-the-fly in just a few seconds and achieves an identification rate of greater than 98%. An AI reconstructs holistic information from incorrect signals if something is scratched or covered under foil.
Photoneo introduces the 3rd generation of Ambient Light Suppression technology to enable 3D scanning even under the most demanding lighting conditions. The technology not only ensures high scanning quality in direct sunlight, but also for large objects with shiny surfaces, such as cars.
The Poly Robot Automated Fixture System (Prafs) from Protos 3D automates the virtual clamping of Zeiss Metrology’s ScanBox technology. Thousands of different components are held on a flexible device. The parts are changed and positioned automatically in seconds without any mechanical retooling.
Thanks to Smart Vision Lights’ hidden strobe technology, LEDs can trigger themselves internally thousands of times/sec, producing a nearly continuous light source. When the light is triggered synchronously with the camera to take a picture, the hidden flash pulses stop and the programming pulse for the camera is executed.
The measuring device from Tenta Vision works according to the principle of laser interferometry and detects stiffness inhomogeneities in a deformation analysis. Components are stressed by an energy input and are caused to deform on the nm scale. This is recorded as a video and visualized using real-time evaluation algorithms.
The 3D V-Rox system from voidsy is a compact and smart photothermal tomography system. Based on active thermography, the device determines the 3D geometry of hidden material and component defects. This makes it possible to determine absolute defect sizes, as well as the lateral defect size or defect depth.
The Abis III optical sensor with multi-color technology (six color cameras, 180 LEDs) from Zeiss IMT has a high error detection rate, an image recording frequency of up to 20Hz and a high and consistent depth resolution. The automated inline surface inspection for car bodies and pressed sheet metal parts detects defects at top speed.
With the myMahr portal, Mahr is presenting a digital service platform.
The GigE Vision standard uses a UDP-based protocol called GVSP to facilitate image transfer using Ethernet. As data rates have increased, some manufacturers have encountered difficulty achieving performance using GVSP, particularly when data rates approach 10Gbps or higher. This has led to experimentation with TCP or RDMA protocols to mitigate those difficulties but we see these options converge the GigEVision standard with point-to-point protocols like CXP and USB.
Vecow ESOM-MT-1200 is built with the new MediaTek Genio platform, enabling customers to deploy AIoT applications at the Edge.
SpecGAGE3D identifies cosmetic defects on reflective objects down to the two-digit µm range.
The high scanning speed and the vibration-isolated and sealed design predestined the iQ-one inspection cell from enigmasoft for 100% inline quality control.
Sony recently released a 247MP rolling shutter CMOS image sensor available in monochrome (IMX811-AAMR) and color (IMX811-AAQR) variants which have a 64.84mm diagonal, a square pixel array, as well as 5.3fps.
The NXT malibu camera from IDS enables AI-based image processing, video compression and streaming in full 4K sensor resolution at 30fps – directly in and out of the camera.
BitFlow has integrated the Nvidia Jetson AGX Orin module with its CoaXPress (CXP) frame grabbers.
The Terascope from the Helmut Fischer Group enables the layer thickness measurement of organic single and multiple layers on any base material with terahertz.
The Computer Vision Toolbox in the 2024a (R2024a) release of the Matlab and Simulink product families from MathWorks provides algorithms, functions and apps for the design and testing of computer vision, 3D vision and video editing systems.
Emergent Vision introduces the expanded real-time 3D/4D reconstruction capabilities within the companie’s eCapture Pro software.
Alkeria’s latest addition to its Celera P camera series, a polarization camera to use dual-USB3 technology, features the 12MP Sony Pregius IMX 253 sensor.
Cognex Corporation’s In-Sight L38 3D Vision System combines AI, 2D, and 3D vision technologies to solve a range of inspection and measurement applications.
The 10GigE camera MV-CH1510-10FM from Hikrobot (distributor Maxxvision) uses Sony’s IMX411 rolling shutter CMOS to transmit images with a resolution of 151MP and 6.2fps.
Teledyne Flir IIS announced SightBase – a Software-as-a-Service (SaaS) platform – that accelerates the design-in cycles for imaging systems.
Starting with a variant that connects to Zebra’s Iris GTX Smart Cameras, Advanced Illumination has developed the LED lighting controller Light Hub.
Aesub offers the Aesub Infinity endless points for 3D scanning of very large components that are quickly placed on large surfaces from the roll.